Rubicon Models
Rubicon Models => Showcase & Gallery => Topic started by: stevepalffy on December 20, 2015, 05:12:21 pm
-
Stuh 42 so far
(http://s4.postimg.org/ieeakmbs9/2015_12_20_20_08_35.jpg) (http://postimg.org/image/ieeakmbs9/)
Hull
(http://s30.postimg.org/l0vba2aq5/2015_12_20_19_34_59.jpg) (http://postimg.org/image/l0vba2aq5/)
-
Nice.
So you add the tracks and running gear after painting the hull, do you assemble the tracks, rear face wheels and idlers etc as a sub assembly then add it afterwards?
I have wondered if Rubicon could do the outside facing wheels separately and have the inside ones attached to the track (yes I remove the link pieces between the inner wheel faces), as that would make the painting easier, the outer faces being painted and then added to the black undercoated lower hull and tracks.
-
Yes sub assemblies on this one...2 x.tracks and wheels...hull....2x shurzen.
(http://s23.postimg.org/5vgda5tzr/20150929_125304_1_3.jpg) (http://postimg.org/image/5vgda5tzr/)
-
I have wondered if Rubicon could do the outside facing wheels separately and have the inside ones attached to the track (yes I remove the link pieces between the inner wheel faces), as that would make the painting easier, the outer faces being painted and then added to the black undercoated lower hull and tracks.
We have several design concepts before the final decision on how to handle the outer and inner wheels. For an average modeler or gamer, our current design works best for them.
Consider this:
1. A one piece outer wheel with connecting link looks very odd. On some vehicles, like on the Panther, it cannot be done.
2. Single piece wheel needs two plastic injection points, cutting it off, filing and sanding it, rarely give you a "round" circle wheel.
3. Whenever is possible and easy with assembly, we will have separate outer wheels, like on the SdKfz 251.
4. It is really a case by case thing, our current Panzer IV takes a different approach.
We will continue to learn and experiment with new designs based on feedback and new techniques.
;)
-
Not wanting to hijack someone else's thread but...
I have wondered if Rubicon could do the outside facing wheels separately and have the inside ones attached to the track (yes I remove the link pieces between the inner wheel faces), as that would make the painting easier, the outer faces being painted and then added to the black undercoated lower hull and tracks.
We have several design concepts before the final decision on how to handle the outer and inner wheels. For an average modeler or gamer, our current design works best for them.
Consider this:
1. A one piece outer wheel with connecting link looks very odd. On some vehicles, like on the Panther, it cannot be done.
2. Single piece wheel needs two plastic injection points, cutting it off, filing and sanding it, rarely give you a "round" circle wheel.
3. Whenever is possible and easy with assembly, we will have separate outer wheels, like on the SdKfz 251.
4. It is really a case by case thing, our current Panzer IV takes a different approach.
We will continue to learn and experiment with new designs based on feedback and new techniques.
;)
I certainly agree that that would look odd, and that cleaning up the wheels takes me a lot of time. ^___^
-
Personally I like the set up of this kit ....it takes less time to build and the painting is no more difficult for me than if the wheels were separate. ...keep em coming like this and the panther. ..and im happy....if/when I build another Stug I will fully assemble it before paint....just like I did with the Panzer III.
☺
-
Yes sub assemblies on this one...2 x.tracks and wheels...hull....2x shurzen.
(http://s23.postimg.org/5vgda5tzr/20150929_125304_1_3.jpg) (http://postimg.org/image/5vgda5tzr/)
Thanks, I am always on the lookout for better ways of building and painting.
From your later post you would just have the lower hull, upper hull and skirts for painting your next version?
-
Details painted ready for washes.
(http://s10.postimg.org/ttq23150l/2015_12_21_20_21_57.jpg) (http://postimg.org/image/ttq23150l/)
-
Vallejo oiled earth wash applied.
(http://s11.postimg.org/3pgyuws67/2015_12_21_22_55_55.jpg) (http://postimg.org/image/3pgyuws67/)
(http://s10.postimg.org/wou05y6qt/2015_12_21_22_54_15.jpg) (http://postimg.org/image/wou05y6qt/)
(http://s11.postimg.org/jcctm0vbz/2015_12_21_22_55_07.jpg) (http://postimg.org/image/jcctm0vbz/)