Author Topic: Panzer III Ausf.N2 Rubicon 28mm 1/56th  (Read 5125 times)

jamesvalentine

  • Private
  • *
  • Posts: 101
    • View Profile
Panzer III Ausf.N2 Rubicon 28mm 1/56th
« on: August 30, 2018, 09:51:46 pm »
Many Panzer III were armed with a short-barrelled 7.5cm KwK 37 L/24 gun. 700 were produced or re-equipped from 1942 and 1943.

However in late 1943 and early 1944 around 1/3rd of these were further converted with a lightweight barrel to a longer 7.5cm KwK 37 L/40.
The two tanks were then designated separately in a fashion similar to the Panzer IV F1 and F2. That being N1 for the L/24 variant and N2 for the L/40.

This used the same breach and ammo as the L/24 but allowed higher velocities and therefore higher penetrative performance for the PzGr. 39/43.

The barrels however were not made to last. But it was predicted that the Panzer III would not outlive the barrels lifespan.
This proved to be correct...
(Note this is fictional)
Also needs commander.





Ballardian

  • Corporal
  • **
  • Posts: 281
    • View Profile
Re: Panzer III Ausf.N2 Rubicon 28mm 1/56th
« Reply #1 on: August 30, 2018, 10:34:39 pm »

 I like the camo scheme & colours used :)

Pinky

  • Captain
  • ****
  • Posts: 1,726
    • View Profile
Re: Panzer III Ausf.N2 Rubicon 28mm 1/56th
« Reply #2 on: August 30, 2018, 11:40:24 pm »
It’s Rubicon’s worst kit, but you’ve made it look rather good.

ultravanillasmurf

  • Lieutenant
  • ****
  • Posts: 2,305
    • View Profile
    • Blog:
Re: Panzer III Ausf.N2 Rubicon 28mm 1/56th
« Reply #3 on: August 31, 2018, 01:05:59 am »
Nice paint job. As Pinky says, you have made a good job on the kit.
As I mentioned elsewhere, I guess you are waiting for 284041   German Panzer Crew.
Of course it is fictional, it has four engine covers ^__^.

Jimmy_P

  • Private
  • *
  • Posts: 85
    • View Profile
Re: Panzer III Ausf.N2 Rubicon 28mm 1/56th
« Reply #4 on: September 02, 2018, 12:55:24 am »

Lovely paint job!

jamesvalentine

  • Private
  • *
  • Posts: 101
    • View Profile
Re: Panzer III Ausf.N2 Rubicon 28mm 1/56th
« Reply #5 on: September 15, 2018, 01:20:25 am »
It’s Rubicon’s worst kit, but you’ve made it look rather good.
Their worst is still better than allot of companies best :p

MassRager

  • Cadet
  • *
  • Posts: 23
    • View Profile
Re: Panzer III Ausf.N2 Rubicon 28mm 1/56th
« Reply #6 on: November 17, 2018, 01:04:19 pm »
another really nice job, like how you paint your vehicles (and love you crew on your other stuff)

Pinky

  • Captain
  • ****
  • Posts: 1,726
    • View Profile
Re: Panzer III Ausf.N2 Rubicon 28mm 1/56th
« Reply #7 on: November 22, 2018, 11:15:32 pm »
It’s Rubicon’s worst kit, but you’ve made it look rather good.
Their worst is still better than allot of companies best :p

No.  It's just a bad kit.  It doesn't even bear comparison with the Warlord/Italeri Panzer III.

jamesvalentine

  • Private
  • *
  • Posts: 101
    • View Profile
Re: Panzer III Ausf.N2 Rubicon 28mm 1/56th
« Reply #8 on: November 24, 2018, 07:55:38 pm »
It’s Rubicon’s worst kit, but you’ve made it look rather good.
Their worst is still better than allot of companies best :p

No.  It's just a bad kit.  It doesn't even bear comparison with the Warlord/Italeri Panzer III.
I don't really care as i fully enjoyed building and painting both of the Rubicon ones I've bought.
So it's not a bad kit at all for me.