1366
General Discussions / Re: Q3/17 New Releases - Box Art #4 - 170822
« on: August 22, 2017, 03:42:22 pm »
And the CMP!
Yay!
Yay!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
1367
Work In Progress / Re: T-26 Soviet Light Infantry Tank - More Line Drawings 170524
« on: August 21, 2017, 02:46:38 pm »
Nice.
1368
Work In Progress / Re: M4 Sherman - M4A2 Decal Sheet - Soviet Version (??) 170821
« on: August 21, 2017, 05:24:53 am »
Za Rondiny!
Brings back memories of 'seventies comics.
I will need to look at the Uncle Emcha book.
Brings back memories of 'seventies comics.
I will need to look at the Uncle Emcha book.
1369
General Discussions / Re: What's Warlord up to?
« on: August 21, 2017, 05:17:47 am »They're kits made for warlord and not just rushed up/downscaled kits.I did wonder as PSC have recently released the Blitz in 15mm (and have ceased to publish the instructions on their website).
1370
Work In Progress / Re: British 15cwt CMP Truck - TS1 Plastic Painted 170530
« on: August 20, 2017, 11:28:25 pm »Very nice! Q3?Are you still waiting on final bits and pieces for this?
After the M4A2?
1371
Work In Progress / Re: M4 Sherman - M4A2 Decal Sheet 170819
« on: August 19, 2017, 08:07:25 pm »
Do the division marks cover the major users of the Sherman III?
I am away and do not have access to my limited library.
I am away and do not have access to my limited library.
1372
Work In Progress / Re: LVT Project - LVT(A)-2 3D Drawings 170819
« on: August 19, 2017, 02:42:47 pm »
Should that be 6.5mm armour elsewhere?
Looking good.
Looking good.
1373
General Discussions / Re: Q3/17 New Releases - Box Art #2 & M21 MMC Details - 170818
« on: August 18, 2017, 09:17:01 pm »
Do you get one of your new bases with the mortar crew?
1374
Work In Progress / Re: Digital Sculpts - US Paratroopers Template 170817
« on: August 18, 2017, 05:00:19 am »
Will you be providing an Iain (M) Banks style Knife mssile for this figure?
1375
Work In Progress / Re: Production Schedule - Updated 170816
« on: August 18, 2017, 04:55:00 am »
Colours is going to to be expensive , hopefully PSC will be there.
1376
Work In Progress / Re: M4 Sherman - M4A2 & Sherman III 170817
« on: August 18, 2017, 04:52:46 am »
Nice, looking forward to this one.
Is the sand shield used for storage the same moulding as the complete sand shield? From the image it appears to lack some of the details(I have not seen a detailed photograph of the real thing but would assume that it would have the same fixtures).
Is the sand shield used for storage the same moulding as the complete sand shield? From the image it appears to lack some of the details(I have not seen a detailed photograph of the real thing but would assume that it would have the same fixtures).
1377
Work In Progress / Re: LVT Project - LVT-4 Cargo Bay Details 170814
« on: August 15, 2017, 02:58:56 pm »
Just had a look through the surviving LVT pdf.
Looking at the French armour museum example, that plate is the right height for a back board for the folding seats (you can see it behind the folded up seat).
It does appear to be present in all the cargo interiors visible.
What we need is someone close to one of them to have a look and report back.
Looking at the French armour museum example, that plate is the right height for a back board for the folding seats (you can see it behind the folded up seat).
It does appear to be present in all the cargo interiors visible.
What we need is someone close to one of them to have a look and report back.
1378
Work In Progress / Re: LVT Project - LVT-4 Cargo Bay Details 170814
« on: August 15, 2017, 02:50:02 pm »
Looking at the photograph (scale is difficult to judge) the three vertical structures look like they are flattened "loops" and the metal panel is slid through them. There is a dark area at the top that looks like a gap. The long metal plate looks like it is slid through the loops and secured with the three studs visible on the three vertical structures.
If that was the case, it does seem very odd as you could only remove the panel with the rear door down.
It is the wrong shape to protect the sides against the cargo hitting it, the loops project beyond and would be hit.
It could be they are some kind of optional sand shield or trim vane, stored internally to prevent damage.
It is difficult to tell from just the one photograph.
If that was the case, it does seem very odd as you could only remove the panel with the rear door down.
It is the wrong shape to protect the sides against the cargo hitting it, the loops project beyond and would be hit.
It could be they are some kind of optional sand shield or trim vane, stored internally to prevent damage.
It is difficult to tell from just the one photograph.
1379
Showcase & Gallery / Re: DAK Diorama for Britcon 2017
« on: August 10, 2017, 11:24:49 pm »
Very good.
So when do you start work on doing trees?
So when do you start work on doing trees?
1380
Wish Lists / C15TA Armoured Truck
« on: August 09, 2017, 04:15:52 pm »
Based on the CMP 15 hundredweight truck.
https://en.m.wikipedia.org/wiki/C15TA_Armoured_Truck
Only thought of it because of:
http://the.shadock.free.fr/Surviving_C15TA_and_Armoured_Command_Vehicles.pdf
Not sure about how much of your existing work can be reused.
There is also the Otter.
https://en.m.wikipedia.org/wiki/C15TA_Armoured_Truck
Only thought of it because of:
http://the.shadock.free.fr/Surviving_C15TA_and_Armoured_Command_Vehicles.pdf
Not sure about how much of your existing work can be reused.
There is also the Otter.