Rubicon Models
Rubicon Models => Work In Progress => Topic started by: Rubicon Models on July 14, 2015, 12:20:46 pm
-
This is new on the Drawing Board, but thought it is only right to show you what we have been doing for our Allies customers, besides all the upcoming US new releases... Some background history on the Studebaker US6:
Studebaker and REO built a total of 219,882 2-1/2-ton 6x6 trucks in thirteen variations. Most were exported to the Soviet Union (from 1942) with limited use by the American armed forces.
Large numbers of Lend-Lease Studebaker trucks were sent into the Soviet Union via the Persian Corridor. The Soviets found them a good platform for "Stalin Organ" Katyusha rocket launchers, although it was not their prime use in the Soviet Union. It fulfilled many roles in the Red Army, such as pulling artillery and was renowned for its ruggedness and reliability. The truck was affectionately known as the Studer by Soviet troops.
Studebaker US6 trucks were also used in the construction of the Burma Road as well as the Alcan Highway in North America.
Instead of showing you the actual US6 truck, we are announcing this project with a lend-lease version with the infamous BM13 Katyusha! <- Pinky, this one is for you!!
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20On%20the%20Drawing%20Board%20150711-3_zpsuxhz2vma.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20On%20the%20Drawing%20Board%20150711-4_zpsiieda9yn.jpg)
This is just the preliminary work, we are continually making changes to it until we are satisfied with the design, then comes the prototyping.
Will post the truck version at a later date. Enjoy!
-
Looks very good. Another great choice of subject.
-
What a great idea with so many options.
-
Update the 3D drawings to include the truck itself, plus changes to the BM13 support frame...
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20On%20the%20Drawing%20Board%20150715-1_zpsg7vfbigo.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20On%20the%20Drawing%20Board%20150715-2_zps3dsrnesd.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20On%20the%20Drawing%20Board%20150715-3_zpsllhxd2ge.jpg)
Enjoy!
-
The basic truck looks good too (I assume the actual model with have some seats!).
I hope you can give the Katyusha launcher the Rubicon treatment i.e. produce it in as few parts as possible.
-
The basic truck looks good too (I assume the actual model with have some seats!).
If you look closely, there are seats on the drawing. Also, the seats should be removable as option too!
I hope you can give the Katyusha launcher the Rubicon treatment i.e. produce it in as few parts as possible.
You bet!
-
Latest 3D Prototypes for our Studebaker US6 project!
The US6 truck...
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB04-US6-01_zpswrbki3g7.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB05-US6-02_zpspgj36h1p.jpg)
The US6 with BM13 Multiple Rocket Launcher "Katyusha"
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB01-BM13-01_zpssdltxznk.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB02-BM13-02_zpspd3jp5wx.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB03-BM13-03_zps42t79dtz.jpg)
Enjoy!
-
Looking good! It seems to capture the Studebaker's lines very well. From a quick look at photos of Red Army vehicles, it might be worth checking whether the wheel hubs are completely accurate. The front bumper also seems to have protruded forwards a bit more. But these are very minor points.
Any chance of a close-up of the driver? Will it have a canopy for the cargo bed?
-
Looking good! It seems to capture the Studebaker's lines very well. From a quick look at photos of Red Army vehicles, it might be worth checking whether the wheel hubs are completely accurate. The front bumper also seems to have protruded forwards a bit more. But these are very minor points.
Any chance of a close-up of the driver? Will it have a canopy for the cargo bed?
The wheel hub matches with available photos that we had on file (books and online images). At least these are the "original" wheel hub that initially came with the US6. We did saw different ones, probably from the Russians... Will check measurement on the front bumper.
Will try to get some macro images for the driver... and YES, there is going to be a canopy.
;)
-
I don't pretend to know much about Studebakers, but the photos of them in Soviet service seem to show a protruding wheel hub (see the examples below). One of these photos also shows that the bumper protruded further. The other seems to show some kind of winch on the front. See what you think.
-
I don't pretend to know much about Studebakers, but the photos of them in Soviet service seem to show a protruding wheel hub (see the examples below). One of these photos also shows that the bumper protruded further. The other seems to show some kind of winch on the front. See what you think.
We are also doing the winch version, just not shown. We are having a studio meeting tomorrow, issues with the tyre and the tyre cab are on the list. We also have some comments from our Polish/Russian modellers too! All will be raised during the meeting.
;)
-
I bet the Polish and Russian modellers are happy to see this kit!
I don't have any decent references on the Katyusha launcher, so nothing useful to add on that except that I like the simplified design.
-
Revised 3D prototypes of the Studebaker US6 truck and the BM13 MRL...
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/US6%20Series%20Teaser%20151004-1_zpszox4sz7k.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/US6%20Series%20Teaser%20151004-2_zpsz36n4quc.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/US6%20Series%20Teaser%20151004-3_zpsh6htil4q.jpg)
Enjoy!
-
In the katyusha I have the impression that the rockets would hit the structure that holds them, in the trinagular part of the structure that sticks out of the ramp, or maybe to launch it, the ramp is inclined further and the porblem disappears.
-
In Europe, people traditionally gave servants and tradespeople presents in "present boxes" on the day after Christmas, in a custom dating back since the middle ages...
Today, we are showing our TS1 plastic Studebaker US6 and BM13 sprues! These three sprues will enable you to build...
- A standard Studebaker US6 truck
- with or without a canvas top
- rear of the canvas top can be in open or close position
- with or without a winch
- or a BM13 Katyusha MRL truck
- with rotating and elevating rocket frame
- comes with driver
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/US6-TS1-151223-01_zpsvhklwx7i.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/US6-TS1-151223-02_zpsxjqc4set.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/US6-TS1-151223-03_zpsl1jvpocj.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/US6-TS1-151223-05_zpsjctlopvg.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/US6-TS1-151223-04_zpsp90iws0u.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/US6-TS1-151223-06_zps1ajwqvyz.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/US6-TS1-151223-07_zpsxtutdzek.jpg)
Enjoy!
;)
-
In Europe, people traditionally gave servants and tradespeople presents in "present boxes" on the day after Christmas, in a custom dating back since the middle ages...
Today, we are showing our TS1 plastic Studebaker US6 and BM13 sprues!
Why, thank-you - just what I wanted ;)
Looks lovely. I particularly like the detail on the canopy - very nice.
Is the driver the first of your 'new generation' figures?
-
Nice underframe detail.
Looks very good.
-
Test-fitting the assembly for the TS1 Studebaker US6 plastic... Will probably paint it up for display afterwards!
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20Studebaker%20US6%20Parts%20151226-1_zpsv1b2tdgo.jpg)
;)
-
Is the driver the first of your 'new generation' figures?
Not really, it is a test sculpt we used, but not an actual production version. Not much time to squeeze a new sculpt into this project.
-
Got to save up, god you`ve some class American machines to be collected and your support trucks are the best.
-
Our in-house artist, Kent Lee, started paint job on the TS1 plastic.
Test fit seems okay, some parts still required minor changes and corrections, but overall results are satisfactory.
Will post more finished pics soon!
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20Studebaker%20US6%20PiP%20151229-1_zpskeqevs6j.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20Studebaker%20US6%20PiP%20151229-2_zps57qzqnax.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20Studebaker%20US6%20PiP%20151229-3_zpsbtwzdxxr.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20Studebaker%20US6%20PiP%20151229-4_zpsia6yoidj.jpg)
Enjoy!
-
Good to see it coming together. The rockets and launcher rails look really good.
-
This is probably our last forum posting for 2015, but surely there will be more to come in the year of 2016!
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20US6-TS1-Painted-151230-01_zps1i4qzp6c.jpg)
Studebaker US6 U3 2.5t 6x6 Cargo Truck
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20US6-TS1-Painted-151230-02_zps8jm687lt.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20US6-TS1-Painted-151230-03_zpsytbqnbcj.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20US6-TS1-Painted-151230-04_zpsr2ejsy5j.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20US6-TS1-Painted-151230-05_zps68pmwvuw.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20US6-TS1-Painted-151230-06_zpsjzrk5iuk.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20US6-TS1-Painted-151230-07_zpsjze3tlaz.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20US6-TS1-Painted-151230-08_zpsesvj3jqj.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20US6-TS1-Painted-151230-09_zpsy0buq1ue.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20US6-TS1-Painted-151230-10_zpsofk8r4np.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20US6-TS1-Painted-151230-11_zpsyhwhajm0.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20US6-TS1-Painted-151230-12_zpsqxeifyge.jpg)
Studebaker US6 with BM13 "Katyusha" Missile Rocket Launcher
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20US6-TS1-Painted-151230-13_zps1aq0rhvs.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20US6-TS1-Painted-151230-14_zpspns9crif.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20US6-TS1-Painted-151230-15_zpsc1qsxjxr.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20US6-TS1-Painted-151230-16_zpssryeztus.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20US6-TS1-Painted-151230-17_zpsekb8jkqc.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20US6-TS1-Painted-151230-18_zpsmth3zge5.jpg)
Studebaker US6 U3 Truck with BM13 "Katyusha" MRL
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20US6-TS1-Painted-151230-19_zpsucmoyfe9.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20US6-TS1-Painted-151230-20_zpslclsqb6a.jpg)
(http://i1373.photobucket.com/albums/ag377/RubiconModels/Studebaker%20US6/FB%20US6-TS1-Painted-151230-21_zpsec8re6lv.jpg)
Enjoy & Happy New Year!
;)
-
Very nice.
-
That looks fantastic . I think with a little kit bashing I could probably make cargo / rocket beds interchangeable . :) Always good to have a duel purpose vehicle in Bolt Action
-
That looks fantastic . I think with a little kit bashing I could probably make cargo / rocket beds interchangeable . :) Always good to have a duel purpose vehicle in Bolt Action
Our design will enable you to do this with ease! ;)
-
The cab with the blast shields made me wonder about a Mad Max style conversion.
-
Looks very good, fine detailed! Must have :)
-
Really pleased with this, I didn`t want a rocket version till now, it looks so good.
-
Looking good !