Rubicon Models
Rubicon Models => Work In Progress => Topic started by: Rubicon Models on July 05, 2021, 07:33:57 pm
-
Seems like we had AGAIN overlooked posting this project to the forum. Sorry...
The M151A1 project was initiated back in late September 2020 and had then split into two that included the M151A1C as well.
Here are the initial M151A1 3D drawings...
(https://thumbs2.imgbox.com/13/93/wOcFnDNl_t.jpg)
(https://thumbs2.imgbox.com/b7/40/mIzacuV8_t.jpg)
(https://thumbs2.imgbox.com/95/d0/OVKUeuea_t.jpg)
(https://thumbs2.imgbox.com/a4/da/IJzkip44_t.jpg)
(https://thumbs2.imgbox.com/7e/34/GsIQENJo_t.jpg)
(https://thumbs2.imgbox.com/a4/dc/zT5C2S9c_t.jpg)
(https://thumbs2.imgbox.com/ff/d7/7U08wOXS_t.jpg)
(https://thumbs2.imgbox.com/61/1f/7jdMfgVv_t.jpg)
(https://thumbs2.imgbox.com/6b/79/Z4rfGNag_t.jpg)
(https://thumbs2.imgbox.com/13/36/bd0gbFg0_t.jpg)
(https://thumbs2.imgbox.com/98/2b/yUzbxD08_t.jpg)
Enjoy!
;)
-
...and these are the M151A1C design drawings from Feb 2021!
(https://thumbs2.imgbox.com/3f/f2/AUJ9i1FS_t.jpg)
(https://thumbs2.imgbox.com/77/9a/DNpx7chQ_t.jpg)
(https://thumbs2.imgbox.com/8c/44/sbNEVUm7_t.jpg)
(https://thumbs2.imgbox.com/d3/93/MKz1PygA_t.jpg)
(https://thumbs2.imgbox.com/5e/96/p4fdmmEr_t.jpg)
(https://thumbs2.imgbox.com/01/67/M7fzYReY_t.jpg)
(https://thumbs2.imgbox.com/e0/43/p0fbujHK_t.jpg)
Enjoy!
;)
-
And then digital crew sculpts for the M151A1C in Apr 2021!
(https://thumbs2.imgbox.com/b5/a7/FQBVDDCG_t.jpg)
(https://thumbs2.imgbox.com/b1/ea/HFkdU63D_t.jpg)
(https://thumbs2.imgbox.com/77/9e/wCDj9R4t_t.jpg)
(https://thumbs2.imgbox.com/74/16/UtEEJKFf_t.jpg)
(https://thumbs2.imgbox.com/81/0c/70hpnBgq_t.jpg)
(https://thumbs2.imgbox.com/42/18/hdKG3e5o_t.jpg)
(https://thumbs2.imgbox.com/05/3b/zsywZtSZ_t.jpg)
(https://thumbs2.imgbox.com/a4/a9/fetsGzSU_t.jpg)
Enjoy!
;)
-
...followed by prototypes of the M151A1 and crew, plus the M151A1C.
(https://thumbs2.imgbox.com/7f/52/M5vnIpbK_t.jpg)
(https://thumbs2.imgbox.com/64/7a/I9Uladii_t.jpg)
(https://thumbs2.imgbox.com/63/2d/6bWQlQN7_t.jpg)
(https://thumbs2.imgbox.com/6c/8c/N2NFAMts_t.jpg)
(https://thumbs2.imgbox.com/52/d6/kV0yn4mo_t.jpg)
(https://thumbs2.imgbox.com/b9/77/WRKbvQ36_t.jpg)
(https://thumbs2.imgbox.com/e6/a8/KLiMmjbh_t.jpg)
(https://thumbs2.imgbox.com/5a/cc/rQfEwS9S_t.jpg)
(https://thumbs2.imgbox.com/f4/9c/7jQz2gqW_t.jpg)
Enjoy!
;)
-
Just now, we had sprue layout back from the factory. Will proceed with mould making once the layouts are approved by the studio.
It is basically 3 sprues shared by two product codes - (1) M151A1 with crew -and- (2) M151A1C with crew.
A common sprue (Sprue A) with 1 different sprue (Sprue B or C) for each product.
(https://thumbs2.imgbox.com/07/eb/513I4quA_t.jpg)
(https://thumbs2.imgbox.com/b4/42/aSackphp_t.jpg)
Enjoy!
;)
-
orsum
-
Is there an ETA already?