1
Work In Progress / Re: US 37mm M3 AT Gun - 3D Prototype 190614
« on: August 19, 2019, 04:11:18 am »
Please be sure to also include a USMC crew... the M3 AT gun was used way longer in the Pacific by both the USMC and the US Army.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
Work In Progress / Re: Production Schedule - Updated 190113
« on: June 13, 2019, 07:42:52 pm »
Might I suggest an armored cab mod kit for your SDKF 7 halftrack...
3
Showcase & Gallery / Re: 280041 SdKfz 250/251 Expansion - SdKfz 251/22 Ausf D - 7.5cm PaK 40 L/46
« on: May 13, 2019, 09:05:21 am »
I magnetized my hull to allow me to swap out the upper hull parts to make the 251/1 or the 251/22... I can also make several other versions of the 251 as well.
I glued the gun mount to the upper hull and made the troops seats removable in this 251 model to allow room for the 7.5cm PaK 40 L/46 mount that hangs down from the upper hull when its in place. Here is the final result... crew and stuff can be placed in the back.
I glued the gun mount to the upper hull and made the troops seats removable in this 251 model to allow room for the 7.5cm PaK 40 L/46 mount that hangs down from the upper hull when its in place. Here is the final result... crew and stuff can be placed in the back.
4
Showcase & Gallery / Sdkfz 251 Ausf D kit builds...
« on: May 12, 2019, 03:50:48 pm »
Been a busy night of building my Rubicon Sdkfz 251 Ds... I magnetized one of the hulls so I can field the 251 7, 8,10 and last but not least the 251/22. For now none of the upper and lower hulls are connected to make painting the interiors easier. I'll add the spare tire and other small details after the basic painting is done. The 28mm sPzB 41 gun for the Assault Engineer 251 is 3D printed (sized up to 1/56) from TigerAce 1945's excellent ultimate 251 set.
A small note: I sent him a small tip as appreciation for his work I used (via thingverse a while back). Please support these guys by doing so; especially if you use their stuff.
And now for the show...
A small note: I sent him a small tip as appreciation for his work I used (via thingverse a while back). Please support these guys by doing so; especially if you use their stuff.
And now for the show...
5
Wish Lists / Heavy At guns of WW3 set...
« on: May 05, 2019, 07:56:41 pm »
Set would have...
German Pak 44 12.8cm AT gun
Soviet 100mm AT gun
British 17 pounder AT gun
USA 3 inch AT gun (yeah I know
)
Japan Type 88 75 mm AA gun (used as AT gun like German 88)
German Pak 44 12.8cm AT gun
Soviet 100mm AT gun
British 17 pounder AT gun
USA 3 inch AT gun (yeah I know
)Japan Type 88 75 mm AA gun (used as AT gun like German 88)
6
Wish Lists / Re: SdKfz 10 Halftrack
« on: May 05, 2019, 07:42:00 pm »
I want something to tow this... with an armored cab preferably (be a nice build option). 
7
General Discussions / Re: About our RESIN products... 190117
« on: May 05, 2019, 07:17:35 pm »
Resin tank bodies and plastic tracks? would be the best of both worlds and easy on your factory workers....LOL
8
Work In Progress / Re: SdKfz 7 Prime Mover 8t - Easy Conversions 190322
« on: May 05, 2019, 11:58:41 am »
How about adding an armored cab conversion kit? That would complete the true options for this model line.
9
Wish Lists / Re: Whirbelwind Turret ?
« on: November 20, 2016, 07:28:19 am »
Yeah we could really use that in Boltaction... the USA guys are killing us with their two airstrike FOs right now.
10
Work In Progress / Re: Digital Sculpts - Soviet Tank Riders Painted 161110
« on: November 15, 2016, 12:14:20 pm »
Gamer suggestion... make a mounting base of some kind that can hold all the figures in a bunch that fits on to the back of your T-34 engine deck so we can place them on the model to show mounted tank riders and then remove them when they dismount and become regular infantry models (using other models of course).
11
Work In Progress / Re: German AT Guns - Gun Crew 160905
« on: November 15, 2016, 11:47:18 am »
Nice set of light and medium AT guns for sure. I'll be getting them for my Germans when they come out.
How abut a little discussion on some heavy AT guns for down the road like the 88mm Pak 43/41?
And then there's the king daddy of them all... the 12.8 cm PaK 44 there were two versions made n limited numbers.
I don't know about the rest of you folks but I would most defiantly get this model in 1/56 if only to have it.
How abut a little discussion on some heavy AT guns for down the road like the 88mm Pak 43/41?
And then there's the king daddy of them all... the 12.8 cm PaK 44 there were two versions made n limited numbers.
I don't know about the rest of you folks but I would most defiantly get this model in 1/56 if only to have it.
12
Wish Lists / Re: British Tanks? What British Tanks?
« on: February 03, 2015, 12:20:46 pm »
Early war: Matilda and Crusader tanks maybe the M3 Grant
Mid war: M4 Sherman, Comet/Cromwell
Brit heavies: Churchills or different kinds
Mid war: M4 Sherman, Comet/Cromwell
Brit heavies: Churchills or different kinds
13
Work In Progress / Re: Proposed Project: US Tank Destroyer
« on: February 03, 2015, 11:59:52 am »
I voted the Hellcat. A nice mod for the model would be the 90mm M36 turret for the Hellcat; they made at least one.
14
Showcase & Gallery / Re: PANZERS PANZERS PANZERS
« on: January 29, 2015, 02:07:20 am »
Fantastic work> One little comment: your tracks... I'm a retired armored vehicle veteran and I can tell you for sure when in use a tanks tracks get polished down to the bare metal from contact with the ground and unless you are operating in wet/mud conditions they stayed surprisingly clean. In the sand they can get so polished they almost shine in the sun. I've even sat there in the field, looking at our vehicles tracks thinking to myself how back in the day I had modeled tank tracks so wrong... 
I'd remove the tan from the tracks on your models; especially the Africa Corps ones. unless you are modeling mud (which is a different animal altogether). I'd paint your metal track darkened gun metal (add some black to it), or wash the gun metal coat with black then dry brash with gun metal again followed by a light dry brush high lite with silver.
I'd remove the tan from the tracks on your models; especially the Africa Corps ones. unless you are modeling mud (which is a different animal altogether). I'd paint your metal track darkened gun metal (add some black to it), or wash the gun metal coat with black then dry brash with gun metal again followed by a light dry brush high lite with silver.
15
Introduce Yourself / Re: Introduce Yourself Here...
« on: January 24, 2015, 03:55:18 pm »
Greetings. I play BA in 15mm and I was waiting for more 1/56 plastic models to get into the market before I did the 28mm dive.
I'm thinking Rubicon is the way to go.
I'm thinking Rubicon is the way to go.
Pages: [1] 2