Rubicon Models

Rubicon Models => Official Assembly Instructions => Topic started by: Rubicon Models on April 03, 2015, 11:28:19 am

Title: 280017 StuG III Ausf G
Post by: Rubicon Models on April 03, 2015, 11:28:19 am

Assembly Instruction for the StuG III Ausf G

INSTRUCTION HAD BEEN UPDATED
PLEASE CHECK POST BELOW...

Title: Re: 280017 StuG III Ausf G Assembly Instruction
Post by: Cat on April 04, 2015, 04:49:03 am

Do the barrels need to be glued in, or can they be slid on and off for swaps after assembly?

Title: Re: 280017 StuG III Ausf G Assembly Instruction
Post by: Rubicon Models on April 04, 2015, 11:07:42 am

Quote from: Cat on April 04, 2015, 04:49:03 am

Do the barrels need to be glued in, or can they be slid on and off for swaps after assembly?

You mean the "gun barrels"?  Yes, if you wanted to... 

Just make sure you don't have too much paint on the contact point, otherwise will be too tight to remove!
;D

Title: Re: 280017 StuG III Ausf G Assembly Instruction
Post by: Rubicon Models on April 04, 2015, 06:32:36 pm

We have caught a part label error on our StuG III Ausf G assembly instruction sheet:

(http://i1373.photobucket.com/albums/ag377/RubiconModels/StuG%20III%20Ausf%20G/StuG%20III%20Manual%20Error%2001_zps3op0yu5p.jpg)

Sorry for the inconvenience!
:-[

Title: Re: 280017 StuG III Ausf G Assembly Instruction
Post by: Rubicon Models on March 25, 2016, 11:10:57 am

(http://i1373.photobucket.com/albums/ag377/RubiconModels/Assembly%20Instructions/280017%20StuG%20IIIG%20Manual%20160325-1_zpsuvujmdta.jpg)

(http://i1373.photobucket.com/albums/ag377/RubiconModels/Assembly%20Instructions/280017%20StuG%20IIIG%20Manual%20160325-2_zpsgntrdbfw.jpg)

(http://i1373.photobucket.com/albums/ag377/RubiconModels/Assembly%20Instructions/280017%20StuG%20IIIG%20Manual%20160325-3_zpsnshppjzw.jpg)

(http://i1373.photobucket.com/albums/ag377/RubiconModels/Assembly%20Instructions/280017%20StuG%20IIIG%20Manual%20160325-4_zpskgfpiwgd.jpg)

Last Update: 160325